Niti 5M Straight Wires，Cost-effective, Flexible cutting, Strong versatility, Suitable for various types of straight wire arch brackets.
Product Description
Nickel titanium 5-meter straight wire is a disc-shaped long straight wire made of medical super elastic nickel titanium alloy. The standard length of a single disc is 5 meters. It belongs to the loose basic archwire for orthodontic clinical use and is cut and bent by doctors as needed to make personalized archwires. Super elastic, 5-meter long, cost-effective, flexible cutting, strong versatility, suitable for various types of straight wire arch brackets. Good resilience. The 5-M wire have 5 size.The length is 5 meters. There are two packaging methods: roll packaging and bag packaging. This is also one of the products in our range of dental consumables.
Advantage
Clinical use
Product Specifications
| Type | Orthodontic Products |
| Name | NiTi – 5-M archwires |
| Size | Round:0.012"/0.014"/0.016"/0.018"/0.020" |
| Package | 1pcs/spool/bag |
| Material | NiTi |
1. Super
elastic strength
Excellent
superelasticity at room temperature, rapid rebound after deformation, minimal
residual deformation, providing gentle and sustained corrective force.
2. Soft
and constant force value
Compared
to stainless steel wire, it has lighter strength, less attenuation, lower pain,
and less periodontal stimulation, making it suitable for initial alignment.
3.
Smooth and low friction surface
High
smoothness, low friction with brackets, smoother tooth sliding, and high
movement efficiency.
4.
Corrosion resistance+biocompatibility
Resistant
to saliva acid and alkali corrosion, not easily rusted or discolored; Nickel
titanium alloy has good biocompatibility and minimal mucosal irritation.
5. Long
disk installation, high cost-effectiveness
5-meter
large packaging, can be cut as needed, with low cost and minimal waste,
suitable for bulk use in routine cases.
● Following
the principle of changing threads from fine to coarse, initially use a fine
diameter (0.012 "/0.014").
● Cut
the length as needed, avoid violent repeated bending during bending, and
prevent elastic attenuation.
● Only
used for leveling in the early and middle stages, and stainless steel square
wires need to be replaced for fine adjustment in the later stage.